Special machine for PC barrel
Short Description:
According to customer’s requirements, we development some special machine. Such as special extrusion system for automobile material, different structure 3D air duct machine to follow different requirements, big machine for pallet and many special shaped products. Product Description: HFB82PC PC Special Machine For PC Barrel It is the most famous series with the highest popularity. It is well-known to many customers all over the world for its excellence, pragmatic, classic. According to dif...
Product Detail
Product Tags
According to customer’s requirements, we development some special machine. Such as special extrusion system for automobile material, different structure 3D air duct machine to follow different requirements, big machine for pallet and many special shaped products.
Product Description:
HFB82PC PC Special Machine For PC Barrel
It is the most famous series with the highest popularity. It is well-known to many customers all over the world for its excellence, pragmatic, classic. According to different demand, 25:1 and 30:1 extrusion systems and big die head are for choice. Clamping system adopts two-tie-bar type clamping device with gears and racks synchronously aligned; Cylinder clamps mold by direct pressure; It adopts one-piece mold platen with X-shaped pull arms to increase the bearing rigidity of mold platen; The bevel angle of pull arms is 45°, which makes a large mold area; The extrusion system adopts frequency control of motor speed, and the amount of extrusion is large; It adopts PLC programmable controller made by Panasonic of Japan, of which prorams are optimized; All electric equipments adopt world-famous products.
Machine Features:
It is specially designed for the production of PC pure water bucket. It can also produce various hollow blow molding products made of PC such as lampshades, bottles, pots, cans, barrels etc.
HFB82PC
|
Machine Model |
HFB82PC |
|
|
Max. Product Volume(L) |
25 |
|
|
Outline Dimension（L×W×H m） |
4.5×2.5×3.8 |
|
|
Machine weight（t） |
12 |
|
|
Plasticizing system |
Screw Diameter(mm） |
∮82 |
|
Screw L/D |
25:1 |
|
|
Extruder Motor Power（kW） |
30 |
|
|
Plasticizing Capacity(kg/h) |
90（PC） |
|
|
Screw rotation speed ( Rev./Min.) |
10-60 |
|
|
Heating zone |
5 |
|
|
Heating Power（kW） |
34 |
|
|
Die Head System |
Accumulator Volume（L) |
1.5 |
|
Heating Power（kW） |
8.7 |
|
|
Max. Die Orifice(mm） |
∮80/120（Big Die head） |
|
|
Heating Zone |
4 |
|
|
Clamping System |
Mould Platen (W×H mm） |
740×600 |
|
Min. Spacing(mm） |
330 |
|
|
Max. Spacing(mm） |
780 |
|
|
Clamping Force(kN） |
210 |
|
|
Platform |
Lifting stroke（mm） |
350 |
|
Lifting speed（mm/min） |
30 |
|
|
Hydraulic System |
Rated pressure ( MPa) |
16 |
|
Motor power (KW) |
45 |
|
|
Thickness controller |
Rated pressure (MPa ) |
16 |
|
Rated flow ( L / min. ) |
23 |
|
|
Motor Power( KW ) |
4 |
|
|
Power Supply |
Supply Voltage（V） |
AC380V±10% |
|
Supply Frequency（Hz） |
50 |
|
|
Wire Connection |
Three Phase Four Wires |
|
|
Total Rated Power（kW） |
92 |
|
|
Average Energy Consumption（kW） |
45 |
|
|
Air Supply |
Air Source Pressure（MPa） |
0.8-1 |
|
Working Pressure（MPa） |
0.6-0.8 |
|
|
Air Consumption（m3/min） |
0.4-1 |
|
|
Water Supply |
Cooling water pressure（MPa） |
0.3 |
|
Cooling water flow (L/Min) |
100 |
|
